rf-explore

Not connected

Add a phone by USB ID

For phones that “Pair phone…” doesn't list. The IDs are saved in this browser and added to the device picker; rf-explore then tries every vendor-specific port on the phone and keeps the one that answers DIAG commands. Find the IDs in macOS System Information → USB, or with lsusb.

UE capability hexdumps

For uecapability.smartphonecombo.it/parser. Collected while connected. The phone sends its capabilities when the network asks, usually at attach: connect, then toggle airplane mode off and on. The CA combination logs come at the same time. Works over LTE (EN-DC) and 5G SA.

Band lock read-only

The modem's band preferences, read from its EFS while connected. Nothing is written to the phone. Before anything ever writes these files, back up each phone's modem EFS: see docs/efs-recovery.md.

Click “Read from phone”.

LTE Serving Cell

NR Serving Cell

Data Metrics

QAM Usage

CA Matrix

Last second, downlink and uplink. Identity is kept for 60 s after a carrier's last measurement (greyed values are older than 5 s). * = carrier match is a best guess, ≥ = bandwidth estimated from RBs used.

Downlink CA detail

Last second, one column per carrier. LTE from the PDSCH stats (0xB173), NR from the PDSCH status (0xB887). BLER counts every transmission; initial BLER counts first transmissions only.

Downlink QAM Usage

Share of received downlink transport blocks

Uplink CA detail

Last second, one column per carrier. LTE from the PUSCH Tx report (0xB139, MCS derived from TB size), NR from the UL schedule report (0xB883). NR Tx power = requested PUSCH power capped at Pcmax (0xB884). Red Tx power = near the cap, so the uplink is power-limited.

Uplink QAM Usage

Share of transmitted uplink transport blocks

Downlink throughput

Mbit/s at the physical layer, last 2 minutes

Uplink throughput

Mbit/s at the physical layer (LTE: MAC grants, NR: transmitted TB bytes)

Serving cell RSRP

dBm (LTE RSRP, NR SS-RSRP)

PUSCH Tx power

dBm, average per second (UE maximum is 23 dBm)

Downlink initial BLER

% of first transmissions that failed CRC (networks target about 10%)

Uplink RBs

Average RBs per scheduled transmission

Downlink MCS

Average per second. LTE and NR use different MCS tables, so compare each against itself

Uplink MCS

Average per second

Downlink MCS distribution

Transport blocks since connect / reset

Uplink MCS distribution

Transport blocks since connect / reset

Cells

LTE from 0xB193 (one packet per carrier), NR from 0xB97F (SSB measurements)

Log packets

Every enabled log code. "Decoded" means a verified parser exists for that version. Click a row for the latest raw payload.